Home Products Transducers Accelerometers SV 150 Tool Mounted MEMS Accelerometer

SV 150 Tool Mounted MEMS Accelerometer

SV 150 is a tri-axial accelerometer designed to be used with the SV 106D human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2.

Interested

For more information on SV 150 Tool Mounted MEMS Accelerometer or to request a quote, contact our team now:

Overview
Specification
Download

The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor’s TEDS memory stores information about calibration factor limiting the risk of configuration errors. The accelerometer is supplied with three different diameter fixing clamps to conveniently match the grip of the vibrating tool being measured. SV 150 offers more robust and lower cost alternative to a traditional piezo-electric accelerometer.

  • Designed for hand arm vibration measurement
  • Uses MEMS transducer technology
  • Tool mounted using adjustable clips
  • TEDS memory for automatic instrument calibration

SV 150 Hand-arm Triaxial Accelerometer Specification

Performance

Number of axis3
Sensitivity (± 5 %)0.661 mV/ms-2 at 79.58 Hz
Measurement range2000 ms-2 PEAK
Frequency response0 Hz ÷ 1500 Hz
Resonant frequency16.5 kHz (MEMS transducer)
Electrical noise< 0,14 ms-2 RMS, Wh weighting
Force rangen/a

Electrical:

Supply current< 5.0 mA
Supply voltage3.3 V ÷ 5.5 V
Bias voltage1,5 V ± 0.1 V
Output impedance51 Ohms
Charge/discharge time constant30 sec. typ
TEDS memoryinstalled (power supply pin)

Environmental Conditions:

Maximum vibration100 000 ms-2 shock survival
for MEMS
Temperature coefficient<+/-0.02 %/°C
Temperaturefrom -10°C to +50°C
Humidityup to 90 % RH, non-condensed

Physical:

Sensing elementMEMS
Cableintegrated 1.4 meters
ConnectorLEMO 5-pin plug (SV 106 compatible)
Dimensions15.5mm x 15.5 mm x 15.5mm
Weight20 grams (without cable)

Accessories:

Calibration adapterSA 155 (option)

SHARE THIS